Management

[pic]

[pic]Parts cleaning

From Wikipedia, the free encyclopedia
Jump to: navigation, search
Parts cleaning is essential to many industrial processes, as a prelude to surface close or to protect sensitive components. Electroplating is contributionicularly sensitive to part cleanliness, since molecular layers of oil can prevent adhesion of the coating. ASTM B322 is a standard guide for cleaning metals prior to electroplating. Cleaning processes let in solvent cleaning, hot alkaline detergent cleaning, electrocleaning, and acid etch. The nigh common industrial test for cleanliness is the waterbreak test, in which the surface is well rinsed and held vertical. Hydrophobic contaminants such as oils cause the water to ivory and break up, allowing the water to conk out rapidly. Perfectly clean metal surfaces be deliquescent and will retain an unbroken winding-clothes of water that does not bead up or drain off. ASTM F22 describes a version of this test. This test does not detect hydrophilic contaminants, but the electroplating process can displace these easily since the solutions are water-based. Surfactants such as soap reduce the sensitivity of the test, so these must be thoroughly rinsed off.

|Contents |
|[hide] |
|1 Definitions and classifications |
|2 Elements and their interactions |
|2.



1 Parts and materials to be cleaned |
|2.2 Contaminations |
|2.3 Charging |
|2.4 Place of cleaning |
|2.5 Cleaning equipment and performance |
|2.6 Quality requirements...If you want to get a full essay, club it on our website: Orderessay



If you want to get a full essay, wisit our page: write my essay .